7 HZ SkyTrak System w/ Raven Connector

SkyTrak is a GPS based velocity sensor that produces true ground speedpulses to equipment designed to interface with radar ground speed andwheel speed sensors. SkyTrak can be quickly transferred from vehicle tovehicle, provides high accuracy, and is easy to install and use. Simplyconnect the SkyTrak to your monitor/control equipment, preform the samecalibration you would use for other pulse sensors, and your ready togo. No calibration is needed when using with Kontrol-Flo II.

• SK-1007 has a refresh rate of 7 times per second
• 16 Channel GPS WAAS Enabled GPS Receiver features high acquisition and tracking sensitivity
• Acquisition Rate: Cold Start
• Completely self-contained (GPS receiver, antenna and velocity to pulses converter)
• Can be used with all equipment that is compatible with radar or pulse type speed sensors
• 0.1 MPH accuracy and up
• Surface, bracket, pipe or magnetic mount capable
• Selectable Output pulse rates ensures monitor compatibility
• Standard magnet mount simplifies installation
• Diagnostics LED’s built into the cable help to quickly verify performance
• Consistent pulses/foot output unit to unit
• Velocity Accuracy 0.1 MPH (without SA)
• Backup Battery Life ™3 years
• Enclosure: UV stable, polycarbonate enclosure
• Cable Length: 15 feet
• Power: 4.8 to 16 Volts, 0.1 Amps max
• Backup Battery: CR2032 Lithium Coin
• Size: 4.5" x 2.43"
• Operating Temp.: -40C to +65C (-40F to +149F)
• Storage Temp.: -40C to +80C (-40F to +176F)
• Humidity: 100% Condensing